Press "Enter" to skip to content

What is a potential hazard to your head?

Potential Hazards: Head trauma from falling objects. Bumping the head against fixed objects. Electric shock and burns from contact with exposed electric conductors.

What are the hazards when welding?

Health hazards associated with welding, cutting, and brazing operations include exposures to metal fumes and to ultraviolet (UV) radiation. Safety hazards associated with these processes include burns, eye damage, electrical shock, cuts, and injury to toes and fingers.

What are the 4 high hazard areas?

These presentations focus on the Big Four Construction Hazards – falls, electrocution, caught-in and struck-by. All training materials will cover the four hazards seen regularly on construction sites and will focus on the methods for the recognition and the prevention of these common hazards.

What are the hazards of falling objects?

The most common injuries workers suffer from falling objects are bruises, fractures, strains, and sprains. The objects that commonly fall range from large items such as roof trusses and steel beams to small items such as fasteners and small hand tools. from falling (or from falling very far).

How can you prevent a falling object a hazard?

Overhead work

  1. Secure all tools and materials to prevent them from falling on people below.
  2. Use toe boards or guardrails on scaffolds to prevent objects from falling. Alternately, use debris nets or catch platforms to grab falling objects.

How can we prevent falling objects in the workplace?

Tips for Preventing Falling Object Injuries

  1. Use tool lanyards to prevent tools from falling.
  2. Keep all material at least 3 feet from a leading edge, other than material specifically required for work in process.
  3. Remove items from all loose or unsealed pockets, especially top shirt pockets, such as phones, pens, and tools.
  4. Do not hang objects over guardrails.

What is the first line of defense in all workplace emergencies?

Engineering controls

Which type of sign will indicate there’s an immediate hazard?

Danger signs

Are a tight fitting form of PPE that covers the eyes?

Goggles are tight-fitting eye protection that completely cover the eyes, eye sockets and the facial area immediately surrounding the eyes and provide protection from impact, dust and splashes and vapors. Some goggles will fit over corrective lenses.

What is the most effective work practice control measure?

What is the most effective work practice control measure? It is generally depicted as a pyramid with the most effective method — engineering controls — at the pinnacle, followed by administrative/work practice controls, and finally the least effective — personal protective equipment (PPE).

What is an example of a work practice control in the healthcare setting?

Work practice controls are intended to reduce the likelihood of exposure by changing the way a task is performed. They include appropriate procedures for handwashing, sharps disposal, lab specimen handling, laundry handling, and contaminated material cleaning (OSHA, 2019b).

Which of the following is an example of work practice control?

Work Practice Controls reduce the chance of exposure by altering the manner in which a task is performed. An example of a common work practice control is to recap a needle with a “one-handed scoop” technique. OSHA prohibits recapping needles by holding the cap in one hand and the sharp in the other.

Which of the following is the most commonly used PPE in a clinical setting?

Gloves

What piece of PPE should be removed first?

The order for removing PPE is Gloves, Apron or Gown, Eye Protection, Surgical Mask. Perform hand hygiene immediately on removal. All PPE should be removed before leaving the area and disposed of as healthcare waste.

What are 5 examples of PPE?

PPE includes gloves, gowns, laboratory coats, face shields or masks, eye protection, resuscitation masks, and other protective gear such as hats and booties.

What PPE is often used in the educational environment?

overalls and protective aprons. protective headgear – safety helmets, wide brimmed hats to protect against the sun. safety boots or shoes. safety glasses or goggles.

How do you identify hazard?

To be sure that all hazards are found:

  1. Look at all aspects of the work and include non-routine activities such as maintenance, repair, or cleaning.
  2. Look at the physical work environment, equipment, materials, products, etc.
  3. Include how the tasks are done.
  4. Look at injury and incident records.

What are the steps of hazard identification and management?

The four steps for managing WHS risks are:

  • Step 1 – Identify hazards. Find out what could cause harm.
  • Step 2 – Assess risks.
  • Step 3 – Control risks.
  • Step 4 – Review control measures.