Press "Enter" to skip to content

Start Searching the Answers

The Internet has many places to ask questions about anything imaginable and find past answers on almost everything.

How do I know if my spindle bearings are bad?

put a streight round bar in a tool holder and put it in the spindle. Then put a . 0001 indicator on the round bar and push the bar with your hand. If you can deflect the spindle more then a tenth or two with your hand you have a bearing problem.

How often should you grease your mower deck?

Ideally, these pieces should be greased at least once or twice a season. However, the frequency will depend on the size of your lawn and the frequency of your mowing. For example, if you use your lawnmower only a few times a season, one greasing should suffice. If you mow once or twice a week, two is better.

How often should I grease my zero turn mower?

This maintenance is easy to forget but it’s important. You should lubricate the bearings one to two times each mowing season to protect them from wear and keep them spinning smoothly.

What maintenance does a zero turn mower need?

It is important to make sure you clean the mower deck after each use of your zero turn mower. Change the Oil. Oil changes are a minimal investment that are extremely important to the engine life of your zero turn lawn mower. Always complete an oil change at the intervals recommended in the engine manual.

What is #2 lithium grease?

Valvoline Multipurpose Lithium 2 is a mineral base oil grease characterized by its smooth texture and mechanical stability. This general-purpose lithium thickened grease is typically used in normal temperature conditions and has a wide range of industrial and automotive applications.

Can I use wd40 on lawn mower?

Blades. Moving down to the blades, spray your clean lawnmower down with a liberal dose of WD-40, lubricating the metal and breaking up any large accumulations of grass. This will also prevent rust build up after future use.

Where do you grease a lawn mower?

For lubrication, utilize a lever-action type grease gun for the lawn mower. The spindles that need to be lubricated include the cutting spindles and front axle spindles. The grease fittings are situated on the back of the spindle. The front axle spindles are easy to locate and access.